Workforce Development Voucher - Any Cohort

$8,970.00

Give your new hires the tools they need to excel with our transformative "Workforce Development Voucher - Any Cohort" course. This 11-week online, instructor-led program is designed to equip employees with no prior background in building automation with the skills they need to become field-ready service or construction technicians.

Add to compare

Description
Reviews

Structured to allow maximum efficiency, this course enables your employees to be 80% utilized by week 4 of the program. It covers the A-Z of building automation systems, teaching them how to deploy, configure, and troubleshoot these systems from scratch.

Course Breakdown:

Week 1 – Introduction to BAS Field Work

Safety protocols and jobsite conduct
Electrical fundamentals: voltage, current, resistance
Reading wiring diagrams and BAS schematics
Use of tools: multimeters, wire strippers, drills
Intro to HVAC control systems (VAVs, RTUs, chillers)

Week 2 – IT and Controls Integration

IP vs MS/TP network fundamentals
BACnet, Modbus, and LonTalk protocol principles
Layered BAS architecture (field level, automation level, management level)
Device addressing, IP planning, subnetting
Setup of a virtual BAS network for simulation exercises

Week 3 – Variable Air Volume (VAV) and Fan Coil Unit (FCU) Systems

Sequence of operations for VAVs and FCUs
Controller selection and installation
Sensor wiring, damper actuator mounting
Lab exercises: simulate air volume control with sensors and feedback

Week 4 – Rooftop Units (RTUs) and System Architecture

RTU components: compressors, economizers, fans
Mixed air damper control, discharge air reset
Hands-on: wiring and programming a mock RTU
Introduction to supervisory BAS platforms

Week 5 – Mixed Air Handling Units & Interface Design

Design of user-facing graphics
Control logic for mixed air systems and economizers
Alarm and trend setup basics
Lab: build a dashboard in a simulated BAS front-end

Week 6 – Pump Control and Troubleshooting Fundamentals

On/off and variable speed pump control
PID loop tuning for flow and pressure
Use of simulation tools to inject faults and troubleshoot
Lab: simulate wiring and configuring differential pressure sensors

Week 7 – Hydronic Heating System Control

Boilers, mixing valves, and supply/return temperature control
Sensor mapping and safety interlocks
Hands-on: full hot water system simulation with override testing

Week 8 – Chilled Water Systems and Programming Introduction

Overview of chillers, cooling towers, and chilled beams
Sensor calibration, setpoint tuning
Intro to block-based and line programming
Lab: write simple sequences for chilled water loop control

Week 9 – Networking, Cybersecurity, and Advanced Programming

Switch setup, VLANs, DHCP/static IP planning
Cybersecurity practices: firewall rules, remote access policy
Advanced program logic: sequencing, interlocks, resets
Troubleshooting exercises with simulated cyber “breaches”

Week 10 – Checkout, Commissioning & Handoff

Documentation best practices: as-builts, redlines
Commissioning checklists, function tests
Role-playing end-user training
Team-based checkout of full mock system

Week 11 – Practicum

- Final project that simulates a full BAS deployment:
  - Install devices
  - Configure and program control logic
  - Commission and test
  - Present to “client” (instructor/peer review)
- Includes performance evaluation and feedback session

Upon course completion, your employees will not only be able to install and manage complex building automation systems, but they will also have the ability to troubleshoot and resolve system issues swiftly and effectively.

Go here to see upcoming WFD cohorts.

Take the first step towards optimizing your workforce by enrolling your employees in one of our upcoming cohorts.

Invest in your team's professional development and future-proof your organization today with the "Workforce Development Voucher - Any Cohort" course.

** COMPANY MUST PROVIDE LAB MATERIALS - Controller, I/O, etc **

Related Courses:

{"id":7960047124667,"title":"BAS001: Building Automation Systems A to Z","handle":"building-automation-systems-a-to-z","description":"\u003cp\u003eBAS001: Building Automation Systems A to Z is designed to educate you on all facets of Building Automation Systems. If you are new to the industry or simply want to brush up on all things Building Automation, this program is for you. \u003c\/p\u003e\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch2\u003eCourse Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully online and self-paced\u003c\/li\u003e\n\u003cli\u003eOverall course length is 20 hours and 7 minutes\u003c\/li\u003e\n\u003cli\u003eUnabridged audio-book and e-book\u003c\/li\u003e\n\u003cli\u003eAccess to all course material for (1) one full year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eObjectives\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProvide a comprehensive reference guide for all things building automation\u003c\/li\u003e\n\u003cli\u003eUnderstand all aspects of building automation systems\u003c\/li\u003e\n\u003cli\u003eLearn the core knowledge you need to succeed in the field of building automation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eKey Topics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDevelop the fundamental understanding of Heating, Ventilation, and Air Conditioning (HVAC) needed to support your BAS knowledge\u003c\/li\u003e\n\u003cli\u003eGain the foundational awareness of building automation that is required of every building automation professional\u003c\/li\u003e\n\u003cli\u003eBecome a smart buildings expert by gaining a solid understanding of the different types of smart buildings systems and how they work\u003c\/li\u003e\n\u003cli\u003eMake your conversations with information technology (IT) painless by learning the common IT terms, parts, and processes\u003c\/li\u003e\n\u003cli\u003eExplore the subjects of electricity and energy management and discover how they impact building automation systems.\u003c\/li\u003e\n\u003cli\u003eDemystify the procurement process, learn how to work with procurement during the different phases of the process, and learn how to deal with cost segmentation and value-engineering\u003c\/li\u003e\n\u003cli\u003eDiscover how the construction process works and what the involvement of the building automation professional is during the different parts of the construction process\u003c\/li\u003e\n\u003cli\u003eTackle the most difficult BAS project there is (upgrading a BAS) with my step-by-step process and learn when you do and (more importantly) when you don't need to upgrade your BAS\u003c\/li\u003e\n\u003cli\u003eCreate a solid management program for a buildings automation system and learn how to create standards for your future building automation systems\u003c\/li\u003e\n\u003cli\u003eGain a solid understanding of what managed service providers (MSP) are, the pros and cons of the different types of maintenance, and how to maintain a building automation system\u003c\/li\u003e\n\u003cli\u003eHow to build your own knowledge program and how to use financial metrics to define the success of your building automation efforts\u003c\/li\u003e\n\u003cli\u003eLearn the difference between analytics and trends, what analytics are, how they work, and when they are right for a building\u003c\/li\u003e\n\u003cli\u003eLearn what the Internet of Things (IoT) is and how it is impacting the world of building automation\u003c\/li\u003e\n\u003cli\u003eLearn the basics of systems integration, what the three types of integration are, and when to perform each type of integration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eTargeted Audience\u003c\/h2\u003e\n\u003cp\u003eThis course is targeted towards new salespersons, technicians, designers, operators, consulting engineers, and project managers. This course provides the foundational knowledge for all of our other courses.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePre-Requisite Knowledge Requirements\u003c\/h2\u003e\n\u003cp\u003eNo pre-requisite knowledge required. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAdditional Materials Required: NONE\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eSuccessful Completion Requirements\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eViewing all lesson videos in their entirety.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e** No Certificate of Completion or CEUs are offered for this course.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eStudent Testimonial\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003e\"This is THE program to either get you started in the world of controls or to further your education and understanding of principle concepts.\" \u003c\/em\u003e\u003cem\u003e- Joe B.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\"Great, essential content presented in an easy to digest manner.\" \u003c\/em\u003e\u003cem\u003e- Paul G.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eDisclosure of Instructor's Proprietary Interests\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe instructor, who is also the Smart Buildings Academy owner, may mention materials and\/or products that are proprietary to Smart Buildings Academy. If these materials are required for the course(s) this will be clearly identified in the course’s product description on our course page.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAdditional Materials Required: NONE\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRefund Policy\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eALL SALES ARE FINAL AND NON-REFUNDABLE. The fees associated with your purchases will appear on your Active Credit Card Statement through the Identifier \"Smart Buildings Academy LLC\". All prices displayed on the site are quoted in U.S. Dollars, are payable in U.S. Dollars, and are valued and effective only in the United States. Failure to use the product(s) does not constitute a basis for refusing to pay any of the associated charges. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSubject to the conditions set forth herein, you agree to be bound by the Billing Provisions of Smart Buildings Academy LLC in effect at any given time. Upon reasonable prior notice to you (with site updates and\/or e-mail sufficing), Smart Buildings Academy LLC reserves the right to change its Billing Provisions whenever necessary, in its sole discretion. Continued use of the site and\/or purchase of product(s) after receipt of such notice shall constitute consent to any and all such changes; provided, however, that any amendment or modification to the Billing Provisions shall not apply to any charges incurred prior to the applicable amendment or modification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eComplete terms and conditions can be accessed at the following link - \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smartbuildingsacademy.com\/t-and-c?hs_preview=IoENyuRq-172865735957\" target=\"_blank\"\u003eTerms and Conditions\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2024-06-28T07:10:05-07:00","created_at":"2024-06-28T07:10:06-07:00","vendor":"Smart Buildings Academy","type":"Single Seat Course","tags":["Basics","Beginner","Building Automation Systems A to Z"],"price":25000,"price_min":25000,"price_max":25000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46229815656635,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BAS001-1SEAT","requires_shipping":false,"taxable":true,"featured_image":null,"available":true,"name":"BAS001: Building Automation Systems A to Z","public_title":null,"options":["Default Title"],"price":25000,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/TEST_Building_Automation_Systems_A_to_Z.png?v=1719854973"],"featured_image":"\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/TEST_Building_Automation_Systems_A_to_Z.png?v=1719854973","options":["Title"],"media":[{"alt":null,"id":27992366481595,"position":1,"preview_image":{"aspect_ratio":1.778,"height":720,"width":1280,"src":"\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/TEST_Building_Automation_Systems_A_to_Z.png?v=1719854973"},"aspect_ratio":1.778,"height":720,"media_type":"image","src":"\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/TEST_Building_Automation_Systems_A_to_Z.png?v=1719854973","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eBAS001: Building Automation Systems A to Z is designed to educate you on all facets of Building Automation Systems. If you are new to the industry or simply want to brush up on all things Building Automation, this program is for you. \u003c\/p\u003e\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch2\u003eCourse Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully online and self-paced\u003c\/li\u003e\n\u003cli\u003eOverall course length is 20 hours and 7 minutes\u003c\/li\u003e\n\u003cli\u003eUnabridged audio-book and e-book\u003c\/li\u003e\n\u003cli\u003eAccess to all course material for (1) one full year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eObjectives\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProvide a comprehensive reference guide for all things building automation\u003c\/li\u003e\n\u003cli\u003eUnderstand all aspects of building automation systems\u003c\/li\u003e\n\u003cli\u003eLearn the core knowledge you need to succeed in the field of building automation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eKey Topics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDevelop the fundamental understanding of Heating, Ventilation, and Air Conditioning (HVAC) needed to support your BAS knowledge\u003c\/li\u003e\n\u003cli\u003eGain the foundational awareness of building automation that is required of every building automation professional\u003c\/li\u003e\n\u003cli\u003eBecome a smart buildings expert by gaining a solid understanding of the different types of smart buildings systems and how they work\u003c\/li\u003e\n\u003cli\u003eMake your conversations with information technology (IT) painless by learning the common IT terms, parts, and processes\u003c\/li\u003e\n\u003cli\u003eExplore the subjects of electricity and energy management and discover how they impact building automation systems.\u003c\/li\u003e\n\u003cli\u003eDemystify the procurement process, learn how to work with procurement during the different phases of the process, and learn how to deal with cost segmentation and value-engineering\u003c\/li\u003e\n\u003cli\u003eDiscover how the construction process works and what the involvement of the building automation professional is during the different parts of the construction process\u003c\/li\u003e\n\u003cli\u003eTackle the most difficult BAS project there is (upgrading a BAS) with my step-by-step process and learn when you do and (more importantly) when you don't need to upgrade your BAS\u003c\/li\u003e\n\u003cli\u003eCreate a solid management program for a buildings automation system and learn how to create standards for your future building automation systems\u003c\/li\u003e\n\u003cli\u003eGain a solid understanding of what managed service providers (MSP) are, the pros and cons of the different types of maintenance, and how to maintain a building automation system\u003c\/li\u003e\n\u003cli\u003eHow to build your own knowledge program and how to use financial metrics to define the success of your building automation efforts\u003c\/li\u003e\n\u003cli\u003eLearn the difference between analytics and trends, what analytics are, how they work, and when they are right for a building\u003c\/li\u003e\n\u003cli\u003eLearn what the Internet of Things (IoT) is and how it is impacting the world of building automation\u003c\/li\u003e\n\u003cli\u003eLearn the basics of systems integration, what the three types of integration are, and when to perform each type of integration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eTargeted Audience\u003c\/h2\u003e\n\u003cp\u003eThis course is targeted towards new salespersons, technicians, designers, operators, consulting engineers, and project managers. This course provides the foundational knowledge for all of our other courses.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePre-Requisite Knowledge Requirements\u003c\/h2\u003e\n\u003cp\u003eNo pre-requisite knowledge required. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAdditional Materials Required: NONE\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eSuccessful Completion Requirements\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eViewing all lesson videos in their entirety.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e** No Certificate of Completion or CEUs are offered for this course.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eStudent Testimonial\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003e\"This is THE program to either get you started in the world of controls or to further your education and understanding of principle concepts.\" \u003c\/em\u003e\u003cem\u003e- Joe B.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\"Great, essential content presented in an easy to digest manner.\" \u003c\/em\u003e\u003cem\u003e- Paul G.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eDisclosure of Instructor's Proprietary Interests\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe instructor, who is also the Smart Buildings Academy owner, may mention materials and\/or products that are proprietary to Smart Buildings Academy. If these materials are required for the course(s) this will be clearly identified in the course’s product description on our course page.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAdditional Materials Required: NONE\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRefund Policy\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eALL SALES ARE FINAL AND NON-REFUNDABLE. The fees associated with your purchases will appear on your Active Credit Card Statement through the Identifier \"Smart Buildings Academy LLC\". All prices displayed on the site are quoted in U.S. Dollars, are payable in U.S. Dollars, and are valued and effective only in the United States. Failure to use the product(s) does not constitute a basis for refusing to pay any of the associated charges. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSubject to the conditions set forth herein, you agree to be bound by the Billing Provisions of Smart Buildings Academy LLC in effect at any given time. Upon reasonable prior notice to you (with site updates and\/or e-mail sufficing), Smart Buildings Academy LLC reserves the right to change its Billing Provisions whenever necessary, in its sole discretion. Continued use of the site and\/or purchase of product(s) after receipt of such notice shall constitute consent to any and all such changes; provided, however, that any amendment or modification to the Billing Provisions shall not apply to any charges incurred prior to the applicable amendment or modification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eComplete terms and conditions can be accessed at the following link - \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.smartbuildingsacademy.com\/t-and-c?hs_preview=IoENyuRq-172865735957\" target=\"_blank\"\u003eTerms and Conditions\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e"}

BAS001: Building Automation Systems A to Z

$250.00

BAS001: Building Automation Systems A to Z is designed to educate you on all facets of Building Automation Systems. If...

{"id":7960047157435,"title":"BAS100: Building Automation Fundamentals","handle":"building-automation-fundamentals","description":"\u003cp\u003eBAS100: Building Automation Fundamentals provides the foundational knowledge for all our other courses. It takes the student through a complete look at BAS components, processes, and use scenarios. The purpose is to provide a foundational set of knowledge upon which the student can build their career. \u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003ch2\u003eCourse Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully online, self-paced course\u003c\/li\u003e\n\u003cli\u003eOverall course length is 8 hrs 53 min\u003c\/li\u003e\n\u003cli\u003eLive weekly office hours\u003c\/li\u003e\n\u003cli\u003eAccess to all course material for (1) one full year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eObjectives\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnderstand how control modes, points, trends, alarms, and protocols function within a BAS\u003c\/li\u003e\n\u003cli\u003eLearn to use BAS interfaces, graphics, schedules, reports, and construction documents effectively\u003c\/li\u003e\n\u003cli\u003eMaster BAS-related field skills including wiring, IT systems, integration, and commissioning support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eKey Topics Taught\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLearn the 3 different BAS architectures, the pros and cons of each architecture, and how to use each architecture\u003c\/li\u003e\n\u003cli\u003eLearn what points, trends, and alarms are, how and when to use them, and point naming strategies for your BAS\u003c\/li\u003e\n\u003cli\u003eLearn what a user interface is, how to properly structure graphics, why and how to use BAS reporting, and how to create an optimized scheduling strategy\u003c\/li\u003e\n\u003cli\u003eLearn what control systems are, why control systems matter, the four different kinds of control systems, and how to tie each control system type into your BAS\u003c\/li\u003e\n\u003cli\u003eLearn what control modes are, how the 7 common control modes work, when to use each control mode, and how to adjust each control mode\u003c\/li\u003e\n\u003cli\u003eLearn what a protocol is, how the 3 most common protocols work, when to use each protocol, and how to use each protocol\u003c\/li\u003e\n\u003cli\u003eLearn what the three types of controls work are, how each type of controls work is done, and what your role is in each type\u003c\/li\u003e\n\u003cli\u003eLearn the fundamentals of electricity, how wiring works and the different parts of wiring, what a circuit is, and how relays and safeties work in a circuit\u003c\/li\u003e\n\u003cli\u003eLearn the key pieces and parts of an IT system, and how each part relates to a BAS\u003c\/li\u003e\n\u003cli\u003eLearn what the main construction documents are, how to use the documents as a BAS professional, and how to interpret and use BAS controls documents\u003c\/li\u003e\n\u003cli\u003eLearn what test and balance is, how the BAS professional is involved in the T\u0026amp;B process, what commissioning is, and how to create and perform functional tests\u003c\/li\u003e\n\u003cli\u003eLearn the basics of systems integration, what the three types of integration are, and when to perform each type of integration\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eTarget Audience\u003c\/h2\u003e\n\u003cp\u003eThis course is targeted towards new salespersons, technicians, designers, operators, consulting engineers, and project managers. This course provides the foundational knowledge for all of our other courses.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePre-Requisite Knowledge Requirements\u003c\/h2\u003e\n\u003cp\u003eNo pre-requisite knowledge is required.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAdditional Materials Required: NONE\u003c\/em\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eSuccessful Completion Requirements\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eDownloading the Course Guided Notes;\u003c\/p\u003e\n\u003cp\u003eViewing all lesson videos in their entirety;\u003c\/p\u003e\n\u003cp\u003eCompleting and passing Knowledge Checks with a score of 70% or better;\u003c\/p\u003e\n\u003cp\u003eCompleting and passing the Final Exam with a score of 70% or better;\u003c\/p\u003e\n\u003cp\u003eCompleting the Student Course Exit Evaluation\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eUpon Successful Completion\u003c\/h2\u003e\n\u003cp\u003eYou will receive a Certificate of Completion with 0.9 CEU's listed on the certificate and your name will be added to the certification database. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eStudent Testimonial\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003e\"I didn't realize a course like this existed, there is such a dearth of training materials in this industry and I have been so overwhelmed in starting this role. I think this course has given me a language aptitude for the industry I didn't have previously. I've highly recommended your course and structure to my colleagues and even some of my customers!\" \u003c\/em\u003e\u003cem\u003e-Stephanie M.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWondering if your employer will cover this training?\u003c\/h3\u003e\n\u003cp\u003eDownload our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.smartbuildingsacademy.com\/request-for-training\" target=\"_blank\"\u003eRequest for Training Template\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand learn how to ask your employer.\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 class=\"p1\"\u003eDisclosure of Instructor's Proprietary Interests\u003c\/h3\u003e\n\u003cp class=\"p2\"\u003eThe instructor, who is also the Smart Buildings Academy owner, may mention materials and\/or products that are proprietary to Smart Buildings Academy. If these materials are required for the course(s) this will be clearly identified in the course’s product description on our course page.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eRefund Policy\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eALL SALES ARE FINAL AND NON-REFUNDABLE. The fees associated with your purchases will appear on your Active Credit Card Statement through the Identifier \"Smart Buildings Academy LLC\". All prices displayed on the site are quoted in U.S. Dollars, are payable in U.S. Dollars, and are valued and effective only in the United States. Failure to use the product(s) does not constitute a basis for refusing to pay any of the associated charges. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSubject to the conditions set forth herein, you agree to be bound by the Billing Provisions of Smart Buildings Academy LLC in effect at any given time. Upon reasonable prior notice to you (with site updates and\/or e-mail sufficing), Smart Buildings Academy LLC reserves the right to change its Billing Provisions whenever necessary, in its sole discretion. Continued use of the site and\/or purchase of product(s) after receipt of such notice shall constitute consent to any and all such changes; provided, however, that any amendment or modification to the Billing Provisions shall not apply to any charges incurred prior to the applicable amendment or modification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eComplete terms and conditions can be accessed at the following link - \u003c\/span\u003e\u003ca href=\"https:\/\/www.smartbuildingsacademy.com\/t-and-c?hs_preview=IoENyuRq-172865735957\" rel=\"noopener\" target=\"_blank\"\u003eTerms and Conditions\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2024-06-28T07:10:09-07:00","created_at":"2024-06-28T07:10:10-07:00","vendor":"Smart Buildings Academy","type":"Single Seat Course","tags":["designer","programmer","project management","sales","technician"],"price":150000,"price_min":150000,"price_max":150000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46229815689403,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BAS100-1SEAT","requires_shipping":false,"taxable":true,"featured_image":null,"available":true,"name":"BAS100: Building Automation Fundamentals","public_title":null,"options":["Default Title"],"price":150000,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/BAS100_V2.png?v=1742308552"],"featured_image":"\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/BAS100_V2.png?v=1742308552","options":["Title"],"media":[{"alt":null,"id":29170489032891,"position":1,"preview_image":{"aspect_ratio":1.778,"height":720,"width":1280,"src":"\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/BAS100_V2.png?v=1742308552"},"aspect_ratio":1.778,"height":720,"media_type":"image","src":"\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/BAS100_V2.png?v=1742308552","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eBAS100: Building Automation Fundamentals provides the foundational knowledge for all our other courses. It takes the student through a complete look at BAS components, processes, and use scenarios. The purpose is to provide a foundational set of knowledge upon which the student can build their career. \u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h4\u003e\n\u003ch2\u003eCourse Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully online, self-paced course\u003c\/li\u003e\n\u003cli\u003eOverall course length is 8 hrs 53 min\u003c\/li\u003e\n\u003cli\u003eLive weekly office hours\u003c\/li\u003e\n\u003cli\u003eAccess to all course material for (1) one full year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eObjectives\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnderstand how control modes, points, trends, alarms, and protocols function within a BAS\u003c\/li\u003e\n\u003cli\u003eLearn to use BAS interfaces, graphics, schedules, reports, and construction documents effectively\u003c\/li\u003e\n\u003cli\u003eMaster BAS-related field skills including wiring, IT systems, integration, and commissioning support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eKey Topics Taught\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLearn the 3 different BAS architectures, the pros and cons of each architecture, and how to use each architecture\u003c\/li\u003e\n\u003cli\u003eLearn what points, trends, and alarms are, how and when to use them, and point naming strategies for your BAS\u003c\/li\u003e\n\u003cli\u003eLearn what a user interface is, how to properly structure graphics, why and how to use BAS reporting, and how to create an optimized scheduling strategy\u003c\/li\u003e\n\u003cli\u003eLearn what control systems are, why control systems matter, the four different kinds of control systems, and how to tie each control system type into your BAS\u003c\/li\u003e\n\u003cli\u003eLearn what control modes are, how the 7 common control modes work, when to use each control mode, and how to adjust each control mode\u003c\/li\u003e\n\u003cli\u003eLearn what a protocol is, how the 3 most common protocols work, when to use each protocol, and how to use each protocol\u003c\/li\u003e\n\u003cli\u003eLearn what the three types of controls work are, how each type of controls work is done, and what your role is in each type\u003c\/li\u003e\n\u003cli\u003eLearn the fundamentals of electricity, how wiring works and the different parts of wiring, what a circuit is, and how relays and safeties work in a circuit\u003c\/li\u003e\n\u003cli\u003eLearn the key pieces and parts of an IT system, and how each part relates to a BAS\u003c\/li\u003e\n\u003cli\u003eLearn what the main construction documents are, how to use the documents as a BAS professional, and how to interpret and use BAS controls documents\u003c\/li\u003e\n\u003cli\u003eLearn what test and balance is, how the BAS professional is involved in the T\u0026amp;B process, what commissioning is, and how to create and perform functional tests\u003c\/li\u003e\n\u003cli\u003eLearn the basics of systems integration, what the three types of integration are, and when to perform each type of integration\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eTarget Audience\u003c\/h2\u003e\n\u003cp\u003eThis course is targeted towards new salespersons, technicians, designers, operators, consulting engineers, and project managers. This course provides the foundational knowledge for all of our other courses.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePre-Requisite Knowledge Requirements\u003c\/h2\u003e\n\u003cp\u003eNo pre-requisite knowledge is required.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAdditional Materials Required: NONE\u003c\/em\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eSuccessful Completion Requirements\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eDownloading the Course Guided Notes;\u003c\/p\u003e\n\u003cp\u003eViewing all lesson videos in their entirety;\u003c\/p\u003e\n\u003cp\u003eCompleting and passing Knowledge Checks with a score of 70% or better;\u003c\/p\u003e\n\u003cp\u003eCompleting and passing the Final Exam with a score of 70% or better;\u003c\/p\u003e\n\u003cp\u003eCompleting the Student Course Exit Evaluation\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eUpon Successful Completion\u003c\/h2\u003e\n\u003cp\u003eYou will receive a Certificate of Completion with 0.9 CEU's listed on the certificate and your name will be added to the certification database. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eStudent Testimonial\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003e\"I didn't realize a course like this existed, there is such a dearth of training materials in this industry and I have been so overwhelmed in starting this role. I think this course has given me a language aptitude for the industry I didn't have previously. I've highly recommended your course and structure to my colleagues and even some of my customers!\" \u003c\/em\u003e\u003cem\u003e-Stephanie M.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWondering if your employer will cover this training?\u003c\/h3\u003e\n\u003cp\u003eDownload our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.smartbuildingsacademy.com\/request-for-training\" target=\"_blank\"\u003eRequest for Training Template\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand learn how to ask your employer.\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 class=\"p1\"\u003eDisclosure of Instructor's Proprietary Interests\u003c\/h3\u003e\n\u003cp class=\"p2\"\u003eThe instructor, who is also the Smart Buildings Academy owner, may mention materials and\/or products that are proprietary to Smart Buildings Academy. If these materials are required for the course(s) this will be clearly identified in the course’s product description on our course page.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eRefund Policy\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eALL SALES ARE FINAL AND NON-REFUNDABLE. The fees associated with your purchases will appear on your Active Credit Card Statement through the Identifier \"Smart Buildings Academy LLC\". All prices displayed on the site are quoted in U.S. Dollars, are payable in U.S. Dollars, and are valued and effective only in the United States. Failure to use the product(s) does not constitute a basis for refusing to pay any of the associated charges. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSubject to the conditions set forth herein, you agree to be bound by the Billing Provisions of Smart Buildings Academy LLC in effect at any given time. Upon reasonable prior notice to you (with site updates and\/or e-mail sufficing), Smart Buildings Academy LLC reserves the right to change its Billing Provisions whenever necessary, in its sole discretion. Continued use of the site and\/or purchase of product(s) after receipt of such notice shall constitute consent to any and all such changes; provided, however, that any amendment or modification to the Billing Provisions shall not apply to any charges incurred prior to the applicable amendment or modification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eComplete terms and conditions can be accessed at the following link - \u003c\/span\u003e\u003ca href=\"https:\/\/www.smartbuildingsacademy.com\/t-and-c?hs_preview=IoENyuRq-172865735957\" rel=\"noopener\" target=\"_blank\"\u003eTerms and Conditions\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e"}

BAS100: Building Automation Fundamentals

$1,500.00

BAS100: Building Automation Fundamentals provides the foundational knowledge for all our other courses. It takes the student through a complete...

{"id":7960047190203,"title":"BAS200: Control Sequence Fundamentals","handle":"control-sequence-fundamentals","description":"\u003cp\u003eBAS200: Control Sequence Fundamentals provides a comprehensive study of HVAC control sequences. While this course will address theory, it is theory tempered by over a decade's worth of experience working on some of the most complex BAS projects in the world. Students will learn the why behind BAS control strategies and will leave with a solid understanding of “how” systems work. \u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eCourse Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully online, self-paced course\u003c\/li\u003e\n\u003cli\u003eOverall course length is 9 hours and 13 minutes\u003c\/li\u003e\n\u003cli\u003eLive weekly office hours\u003c\/li\u003e\n\u003cli\u003eAccess to all course material for (1) one full year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eObjectives\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaster how HVAC systems function and how to control them\u003c\/li\u003e\n\u003cli\u003eDemonstrate knowledge of BAS controls theory in HVAC systems\u003c\/li\u003e\n\u003cli\u003eDevelop the ability to make design and programming decisions based on system requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eKey Topics Taught\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLearn what control sequences are and how control sequences are structured\u003c\/li\u003e\n\u003cli\u003eMaster the step-by-step process of interpreting control sequences\u003c\/li\u003e\n\u003cli\u003eCreate the foundational system knowledge that allows the student to understand the relationship between space control and upstream systems\u003c\/li\u003e\n\u003cli\u003eDiscover the different ways of controlling and conditioning the air stream along with the interrelationships between air systems and water systems\u003c\/li\u003e\n\u003cli\u003eLearn what hot water systems are, how they are controlled, and how other systems interact with and influence hot water systems\u003c\/li\u003e\n\u003cli\u003eGain an awareness of how and why chilled water systems are used, the methods and processes that control chilled water systems, and the limitations of chilled water systems\u003c\/li\u003e\n\u003cli\u003eLearn what the different strategies for pumping and piping are and how these strategies effect the control and efficiency of water based heating and cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eTargeted Audience\u003c\/h2\u003e\n\u003cp\u003eThis course is targeted towards salespersons, technicians, designers, operators, consulting engineers, and project managers who have at least 6 months of experience with BAS systems or have been through our BAS fundamentals course.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePre-Requisite Knowledge Requirements\u003c\/h2\u003e\n\u003cp\u003eFundamental awareness of the parts and pieces of BAS.\u003c\/p\u003e\n\u003cp\u003e \u003cem data-mce-fragment=\"1\"\u003eAdditional Materials Required: NONE\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eSuccessful Completion Requirements\u003c\/h2\u003e\n\u003cp\u003eViewing all lesson videos in their entirety;\u003c\/p\u003e\n\u003cp\u003eCompleting and passing Knowledge Checks with a score of 70% or better;\u003c\/p\u003e\n\u003cp\u003eCompleting and passing the Final Exam with a score of 70% or better;\u003c\/p\u003e\n\u003cp\u003eCompleting the Student Course Exit Evaluation\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eUpon Successful Completion \u003c\/h2\u003e\n\u003cp\u003eYou will receive a certificate of completion with 0.9 CEU's listed on the certificate and your name will be added to the certification database. \u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eStudent Testimonial\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003e\"I feel really good about using this course because you can complete it on your own time. and being in controls we're travelling all the time so trying to get us in a classroom setting is very difficult. I've actually gone thru controls courses at MATC and I feel that your method of teaching was great and even better than being in a classroom setting.\" \u003c\/em\u003e\u003cem\u003e- David A.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWondering if your employer will cover this training?\u003c\/h3\u003e\n\u003cp\u003eDownload our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.smartbuildingsacademy.com\/request-for-training\" target=\"_blank\"\u003eRequest for Training Template\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand learn how to ask your employer.\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eDisclosure of Instructor's Proprietary Interests\u003c\/h3\u003e\n\u003cp\u003eThe instructor, who is also the Smart Buildings Academy owner, may mention materials and\/or products that are proprietary to Smart Buildings Academy. If these materials are required for the course(s) this will be clearly identified in the course’s product description on our course page.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAdditional Materials Required: NONE\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRefund Policy\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eALL SALES ARE FINAL AND NON-REFUNDABLE. The fees associated with your purchases will appear on your Active Credit Card Statement through the Identifier \"Smart Buildings Academy LLC\". All prices displayed on the site are quoted in U.S. Dollars, are payable in U.S. Dollars, and are valued and effective only in the United States. Failure to use the product(s) does not constitute a basis for refusing to pay any of the associated charges. \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eSubject to the conditions set forth herein, you agree to be bound by the Billing Provisions of Smart Buildings Academy LLC in effect at any given time. Upon reasonable prior notice to you (with site updates and\/or e-mail sufficing), Smart Buildings Academy LLC reserves the right to change its Billing Provisions whenever necessary, in its sole discretion. Continued use of the site and\/or purchase of product(s) after receipt of such notice shall constitute consent to any and all such changes; provided, however, that any amendment or modification to the Billing Provisions shall not apply to any charges incurred prior to the applicable amendment or modification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan\u003eComplete terms and conditions can be accessed at the following link - \u003c\/span\u003e\u003ca href=\"https:\/\/www.smartbuildingsacademy.com\/t-and-c?hs_preview=IoENyuRq-172865735957\" rel=\"noopener\" target=\"_blank\"\u003eTerms and Conditions\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2024-06-28T07:10:12-07:00","created_at":"2024-06-28T07:10:14-07:00","vendor":"Smart Buildings Academy","type":"Single Seat Course","tags":["control sequence","designer","programmer","project management","sales","technician"],"price":250000,"price_min":250000,"price_max":250000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46229815722171,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BAS200-1SEAT","requires_shipping":false,"taxable":true,"featured_image":null,"available":true,"name":"BAS200: Control Sequence Fundamentals","public_title":null,"options":["Default Title"],"price":250000,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/Control_Sequence_Fundamentals_v2.0_1.png?v=1733693140"],"featured_image":"\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/Control_Sequence_Fundamentals_v2.0_1.png?v=1733693140","options":["Title"],"media":[{"alt":null,"id":28703146475707,"position":1,"preview_image":{"aspect_ratio":1.778,"height":720,"width":1280,"src":"\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/Control_Sequence_Fundamentals_v2.0_1.png?v=1733693140"},"aspect_ratio":1.778,"height":720,"media_type":"image","src":"\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/Control_Sequence_Fundamentals_v2.0_1.png?v=1733693140","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eBAS200: Control Sequence Fundamentals provides a comprehensive study of HVAC control sequences. While this course will address theory, it is theory tempered by over a decade's worth of experience working on some of the most complex BAS projects in the world. Students will learn the why behind BAS control strategies and will leave with a solid understanding of “how” systems work. \u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eCourse Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully online, self-paced course\u003c\/li\u003e\n\u003cli\u003eOverall course length is 9 hours and 13 minutes\u003c\/li\u003e\n\u003cli\u003eLive weekly office hours\u003c\/li\u003e\n\u003cli\u003eAccess to all course material for (1) one full year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eObjectives\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaster how HVAC systems function and how to control them\u003c\/li\u003e\n\u003cli\u003eDemonstrate knowledge of BAS controls theory in HVAC systems\u003c\/li\u003e\n\u003cli\u003eDevelop the ability to make design and programming decisions based on system requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eKey Topics Taught\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLearn what control sequences are and how control sequences are structured\u003c\/li\u003e\n\u003cli\u003eMaster the step-by-step process of interpreting control sequences\u003c\/li\u003e\n\u003cli\u003eCreate the foundational system knowledge that allows the student to understand the relationship between space control and upstream systems\u003c\/li\u003e\n\u003cli\u003eDiscover the different ways of controlling and conditioning the air stream along with the interrelationships between air systems and water systems\u003c\/li\u003e\n\u003cli\u003eLearn what hot water systems are, how they are controlled, and how other systems interact with and influence hot water systems\u003c\/li\u003e\n\u003cli\u003eGain an awareness of how and why chilled water systems are used, the methods and processes that control chilled water systems, and the limitations of chilled water systems\u003c\/li\u003e\n\u003cli\u003eLearn what the different strategies for pumping and piping are and how these strategies effect the control and efficiency of water based heating and cooling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eTargeted Audience\u003c\/h2\u003e\n\u003cp\u003eThis course is targeted towards salespersons, technicians, designers, operators, consulting engineers, and project managers who have at least 6 months of experience with BAS systems or have been through our BAS fundamentals course.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePre-Requisite Knowledge Requirements\u003c\/h2\u003e\n\u003cp\u003eFundamental awareness of the parts and pieces of BAS.\u003c\/p\u003e\n\u003cp\u003e \u003cem data-mce-fragment=\"1\"\u003eAdditional Materials Required: NONE\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eSuccessful Completion Requirements\u003c\/h2\u003e\n\u003cp\u003eViewing all lesson videos in their entirety;\u003c\/p\u003e\n\u003cp\u003eCompleting and passing Knowledge Checks with a score of 70% or better;\u003c\/p\u003e\n\u003cp\u003eCompleting and passing the Final Exam with a score of 70% or better;\u003c\/p\u003e\n\u003cp\u003eCompleting the Student Course Exit Evaluation\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eUpon Successful Completion \u003c\/h2\u003e\n\u003cp\u003eYou will receive a certificate of completion with 0.9 CEU's listed on the certificate and your name will be added to the certification database. \u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eStudent Testimonial\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003e\"I feel really good about using this course because you can complete it on your own time. and being in controls we're travelling all the time so trying to get us in a classroom setting is very difficult. I've actually gone thru controls courses at MATC and I feel that your method of teaching was great and even better than being in a classroom setting.\" \u003c\/em\u003e\u003cem\u003e- David A.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWondering if your employer will cover this training?\u003c\/h3\u003e\n\u003cp\u003eDownload our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.smartbuildingsacademy.com\/request-for-training\" target=\"_blank\"\u003eRequest for Training Template\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand learn how to ask your employer.\u003c\/p\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003eDisclosure of Instructor's Proprietary Interests\u003c\/h3\u003e\n\u003cp\u003eThe instructor, who is also the Smart Buildings Academy owner, may mention materials and\/or products that are proprietary to Smart Buildings Academy. If these materials are required for the course(s) this will be clearly identified in the course’s product description on our course page.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAdditional Materials Required: NONE\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cstrong\u003eRefund Policy\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eALL SALES ARE FINAL AND NON-REFUNDABLE. The fees associated with your purchases will appear on your Active Credit Card Statement through the Identifier \"Smart Buildings Academy LLC\". All prices displayed on the site are quoted in U.S. Dollars, are payable in U.S. Dollars, and are valued and effective only in the United States. Failure to use the product(s) does not constitute a basis for refusing to pay any of the associated charges. \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eSubject to the conditions set forth herein, you agree to be bound by the Billing Provisions of Smart Buildings Academy LLC in effect at any given time. Upon reasonable prior notice to you (with site updates and\/or e-mail sufficing), Smart Buildings Academy LLC reserves the right to change its Billing Provisions whenever necessary, in its sole discretion. Continued use of the site and\/or purchase of product(s) after receipt of such notice shall constitute consent to any and all such changes; provided, however, that any amendment or modification to the Billing Provisions shall not apply to any charges incurred prior to the applicable amendment or modification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan\u003eComplete terms and conditions can be accessed at the following link - \u003c\/span\u003e\u003ca href=\"https:\/\/www.smartbuildingsacademy.com\/t-and-c?hs_preview=IoENyuRq-172865735957\" rel=\"noopener\" target=\"_blank\"\u003eTerms and Conditions\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e"}

BAS200: Control Sequence Fundamentals

$2,500.00

BAS200: Control Sequence Fundamentals provides a comprehensive study of HVAC control sequences. While this course will address theory, it is...

{"id":7960047222971,"title":"BAS210: BAS Protocol Bootcamp","handle":"bas-protocol-bootcamp","description":"\u003cp\u003eBAS210: BAS Protocol Bootcamp is designed to teach technical BAS professionals everything they need to know about BACnet, Lon, and Modbus in the shortest amount of time possible so that they can effectively design, install, and support systems based on these protocols.\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eCourse Details\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully online, self-paced course\u003c\/li\u003e\n\u003cli\u003eOverall course length is 6 hours and 51 minutes\u003c\/li\u003e\n\u003cli\u003eLive weekly office hours\u003c\/li\u003e\n\u003cli\u003eAccess to all course material for (1) one full year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eObjectives\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLearn exactly what you need to know about BACnet, Lon, and Modbus\u003c\/li\u003e\n\u003cli\u003eImprove your ability to execute projects BACnet, Lon, and Modbus\u003c\/li\u003e\n\u003cli\u003eDevelop the ability to easily troubleshoot BACnet, Lon, and Modbus\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eKey Topics Taught\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDescribe BACnet objects, services, and properties\u003c\/li\u003e\n\u003cli\u003eExplain BACnet\/IP settings, design considerations, and common troubleshooting methods\u003c\/li\u003e\n\u003cli\u003eDefine BBMD functionality and explained how BACnet networks are scaled\u003c\/li\u003e\n\u003cli\u003eExplain BACnet\/MS\/TP settings, design principles, and typical troubleshooting steps\u003c\/li\u003e\n\u003cli\u003eIdentify Lon nodes, network variables, and configuration parameters\u003c\/li\u003e\n\u003cli\u003eDescribe Lon network services, database, and plug-in functionality\u003c\/li\u003e\n\u003cli\u003eSummarize design and topology considerations for Lon FT-10 and EIA-852 networks\u003c\/li\u003e\n\u003cli\u003eExplain Modbus Objects and basic messaging structure\u003c\/li\u003e\n\u003cli\u003eDescribe Modbus function codes and error codes\u003c\/li\u003e\n\u003cli\u003eCompare Modbus TCP and RTU fundamentals\u003c\/li\u003e\n\u003cli\u003eIdentify Modbus register types, coils, and discrete inputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTargeted Audience\u003c\/h2\u003e\n\u003cp\u003eThis course is designed for BAS technicians, operators, designers, programmers, and service personnel who want to learn how BACnet, Lon, and Modbus work so that they can better support their company and customers.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePre-Requisite Knowledge Requirements \u003c\/h2\u003e\n\u003cp\u003eAwareness of the parts and pieces of BAS. Basic knowledge of IT networking concepts. 2 years of field experience or equivalent.\u003c\/p\u003e\n\u003cp\u003e \u003cem data-mce-fragment=\"1\"\u003eAdditional Materials Required: NONE\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eSuccessful Completion Requirements\u003c\/h2\u003e\n\u003cp\u003eViewing all lesson videos in their entirety;\u003c\/p\u003e\n\u003cp\u003eCompleting and passing the Final Exam with a score of 70% or better;\u003c\/p\u003e\n\u003cp\u003eCompleting the Student Course Exit Evaluation\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eUpon Successful Completion \u003c\/h2\u003e\n\u003cp\u003eYou will receive a Certificate of Completion with 0.7 CEU's listed on the certificate and your name will be added to the certification database.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eStudent Testimonial\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003e\"This is one of the best training courses that I've had. Even though I have had worked with BACNet and Modbus protocols a lot, you answered some of the questions that I always had in my head. Definitely enriched my knowledge about standards, rules and configuration of the protocols that we use now on our industry.\" \u003c\/em\u003e\u003cem\u003e-Ayrat N.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWondering if your employer will cover this training?\u003c\/h3\u003e\n\u003cp\u003eDownload our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.smartbuildingsacademy.com\/request-for-training\" target=\"_blank\"\u003eRequest for Training Template\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand learn how to ask your employer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDisclosure of Instructor's Proprietary Interests\u003c\/h3\u003e\n\u003cp\u003eThe instructor, who is also the Smart Buildings Academy owner, may mention materials and\/or products that are proprietary to Smart Buildings Academy. If these materials are required for the course(s) this will be clearly identified in the course’s product description on our course page.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAdditional Materials Required: NONE\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRefund Policy\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eALL SALES ARE FINAL AND NON-REFUNDABLE. The fees associated with your purchases will appear on your Active Credit Card Statement through the Identifier \"Smart Buildings Academy LLC\". All prices displayed on the site are quoted in U.S. Dollars, are payable in U.S. Dollars, and are valued and effective only in the United States. Failure to use the product(s) does not constitute a basis for refusing to pay any of the associated charges. \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eSubject to the conditions set forth herein, you agree to be bound by the Billing Provisions of Smart Buildings Academy LLC in effect at any given time. Upon reasonable prior notice to you (with site updates and\/or e-mail sufficing), Smart Buildings Academy LLC reserves the right to change its Billing Provisions whenever necessary, in its sole discretion. Continued use of the site and\/or purchase of product(s) after receipt of such notice shall constitute consent to any and all such changes; provided, however, that any amendment or modification to the Billing Provisions shall not apply to any charges incurred prior to the applicable amendment or modification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan\u003eComplete terms and conditions can be accessed at the following link - \u003c\/span\u003e\u003ca href=\"https:\/\/www.smartbuildingsacademy.com\/t-and-c?hs_preview=IoENyuRq-172865735957\" rel=\"noopener\" target=\"_blank\"\u003eTerms and Conditions\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2024-06-28T07:10:16-07:00","created_at":"2024-06-28T07:10:18-07:00","vendor":"Smart Buildings Academy","type":"Single Seat Course","tags":["BAS protocols","designer","integrator","programmer"],"price":75000,"price_min":75000,"price_max":75000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46229815754939,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BAS210-1SEAT","requires_shipping":false,"taxable":true,"featured_image":null,"available":true,"name":"BAS210: BAS Protocol Bootcamp","public_title":null,"options":["Default Title"],"price":75000,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/TESTBASProtocolBootcamp.png?v=1719855166"],"featured_image":"\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/TESTBASProtocolBootcamp.png?v=1719855166","options":["Title"],"media":[{"alt":null,"id":27992388632763,"position":1,"preview_image":{"aspect_ratio":1.778,"height":720,"width":1280,"src":"\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/TESTBASProtocolBootcamp.png?v=1719855166"},"aspect_ratio":1.778,"height":720,"media_type":"image","src":"\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/TESTBASProtocolBootcamp.png?v=1719855166","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eBAS210: BAS Protocol Bootcamp is designed to teach technical BAS professionals everything they need to know about BACnet, Lon, and Modbus in the shortest amount of time possible so that they can effectively design, install, and support systems based on these protocols.\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eCourse Details\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully online, self-paced course\u003c\/li\u003e\n\u003cli\u003eOverall course length is 6 hours and 51 minutes\u003c\/li\u003e\n\u003cli\u003eLive weekly office hours\u003c\/li\u003e\n\u003cli\u003eAccess to all course material for (1) one full year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eObjectives\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLearn exactly what you need to know about BACnet, Lon, and Modbus\u003c\/li\u003e\n\u003cli\u003eImprove your ability to execute projects BACnet, Lon, and Modbus\u003c\/li\u003e\n\u003cli\u003eDevelop the ability to easily troubleshoot BACnet, Lon, and Modbus\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eKey Topics Taught\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDescribe BACnet objects, services, and properties\u003c\/li\u003e\n\u003cli\u003eExplain BACnet\/IP settings, design considerations, and common troubleshooting methods\u003c\/li\u003e\n\u003cli\u003eDefine BBMD functionality and explained how BACnet networks are scaled\u003c\/li\u003e\n\u003cli\u003eExplain BACnet\/MS\/TP settings, design principles, and typical troubleshooting steps\u003c\/li\u003e\n\u003cli\u003eIdentify Lon nodes, network variables, and configuration parameters\u003c\/li\u003e\n\u003cli\u003eDescribe Lon network services, database, and plug-in functionality\u003c\/li\u003e\n\u003cli\u003eSummarize design and topology considerations for Lon FT-10 and EIA-852 networks\u003c\/li\u003e\n\u003cli\u003eExplain Modbus Objects and basic messaging structure\u003c\/li\u003e\n\u003cli\u003eDescribe Modbus function codes and error codes\u003c\/li\u003e\n\u003cli\u003eCompare Modbus TCP and RTU fundamentals\u003c\/li\u003e\n\u003cli\u003eIdentify Modbus register types, coils, and discrete inputs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTargeted Audience\u003c\/h2\u003e\n\u003cp\u003eThis course is designed for BAS technicians, operators, designers, programmers, and service personnel who want to learn how BACnet, Lon, and Modbus work so that they can better support their company and customers.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePre-Requisite Knowledge Requirements \u003c\/h2\u003e\n\u003cp\u003eAwareness of the parts and pieces of BAS. Basic knowledge of IT networking concepts. 2 years of field experience or equivalent.\u003c\/p\u003e\n\u003cp\u003e \u003cem data-mce-fragment=\"1\"\u003eAdditional Materials Required: NONE\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eSuccessful Completion Requirements\u003c\/h2\u003e\n\u003cp\u003eViewing all lesson videos in their entirety;\u003c\/p\u003e\n\u003cp\u003eCompleting and passing the Final Exam with a score of 70% or better;\u003c\/p\u003e\n\u003cp\u003eCompleting the Student Course Exit Evaluation\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eUpon Successful Completion \u003c\/h2\u003e\n\u003cp\u003eYou will receive a Certificate of Completion with 0.7 CEU's listed on the certificate and your name will be added to the certification database.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eStudent Testimonial\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003e\"This is one of the best training courses that I've had. Even though I have had worked with BACNet and Modbus protocols a lot, you answered some of the questions that I always had in my head. Definitely enriched my knowledge about standards, rules and configuration of the protocols that we use now on our industry.\" \u003c\/em\u003e\u003cem\u003e-Ayrat N.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWondering if your employer will cover this training?\u003c\/h3\u003e\n\u003cp\u003eDownload our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.smartbuildingsacademy.com\/request-for-training\" target=\"_blank\"\u003eRequest for Training Template\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand learn how to ask your employer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDisclosure of Instructor's Proprietary Interests\u003c\/h3\u003e\n\u003cp\u003eThe instructor, who is also the Smart Buildings Academy owner, may mention materials and\/or products that are proprietary to Smart Buildings Academy. If these materials are required for the course(s) this will be clearly identified in the course’s product description on our course page.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAdditional Materials Required: NONE\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRefund Policy\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eALL SALES ARE FINAL AND NON-REFUNDABLE. The fees associated with your purchases will appear on your Active Credit Card Statement through the Identifier \"Smart Buildings Academy LLC\". All prices displayed on the site are quoted in U.S. Dollars, are payable in U.S. Dollars, and are valued and effective only in the United States. Failure to use the product(s) does not constitute a basis for refusing to pay any of the associated charges. \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eSubject to the conditions set forth herein, you agree to be bound by the Billing Provisions of Smart Buildings Academy LLC in effect at any given time. Upon reasonable prior notice to you (with site updates and\/or e-mail sufficing), Smart Buildings Academy LLC reserves the right to change its Billing Provisions whenever necessary, in its sole discretion. Continued use of the site and\/or purchase of product(s) after receipt of such notice shall constitute consent to any and all such changes; provided, however, that any amendment or modification to the Billing Provisions shall not apply to any charges incurred prior to the applicable amendment or modification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan\u003eComplete terms and conditions can be accessed at the following link - \u003c\/span\u003e\u003ca href=\"https:\/\/www.smartbuildingsacademy.com\/t-and-c?hs_preview=IoENyuRq-172865735957\" rel=\"noopener\" target=\"_blank\"\u003eTerms and Conditions\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e"}

BAS210: BAS Protocol Bootcamp

$750.00

BAS210: BAS Protocol Bootcamp is designed to teach technical BAS professionals everything they need to know about BACnet, Lon, and...

{"id":7961091801275,"title":"BAS220: BAS Controls Installer Bootcamp","handle":"bas-controls-installer-bootcamp-bas220","description":"\u003cp\u003eBAS220: BAS Controls Installer Bootcamp is a meticulously structured program that prepares participants to be field-ready as service or construction technicians, focusing specifically on low voltage control systems within the context of building automation.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eCourse Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully online, self-paced course\u003c\/li\u003e\n\u003cli\u003eOverall course length is 14 hours and 9 minutes\u003c\/li\u003e\n\u003cli\u003eLive weekly office hours\u003c\/li\u003e\n\u003cli\u003eAccess to all course material for (1) one full year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eObjectives\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLearn to not only proficiently install and manage intricate low voltage control systems, but also excel in troubleshooting and resolving issues efficently. \u003c\/li\u003e\n\u003cli\u003eEmerge as a well-rounded technician with a robust understanding of both theoretical and practical aspects of controls installation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eKey Topics Taught\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIntroduction to essential tools in the BAS industry\u003c\/li\u003e\n\u003cli\u003eAn introduction to Building Automation on fundamentals and key concepts \u003c\/li\u003e\n\u003cli\u003eInsights into HVAC mechanics within BAS\u003c\/li\u003e\n\u003cli\u003eUnderstanding the blueprints of automation projects\u003c\/li\u003e\n\u003cli\u003eCore principles of electricity in BAS context\u003c\/li\u003e\n\u003cli\u003eTechniques for setting up robust networks\u003c\/li\u003e\n\u003cli\u003eComprehensive study of system inputs\u003c\/li\u003e\n\u003cli\u003eDeep dive into system outputs\u003c\/li\u003e\n\u003cli\u003eHands-on approach to installing various devices\u003c\/li\u003e\n\u003cli\u003eSkills for identifying and solving electrical issues\u003c\/li\u003e\n\u003cli\u003eWrapping up projects efficiently and effectively\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTargeted Audience\u003c\/h2\u003e\n\u003cp\u003eThis course is targeted towards electrical installers and subcontractors. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePre-Requisite Knowledge Requirements\u003c\/h2\u003e\n\u003cp\u003eNo pre-requisite knowledge is required. \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cem\u003eAdditional Materials Required: None\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eSuccessful Completion Requirements\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-family: 'Aptos',sans-serif; mso-ascii-theme-font: minor-latin; mso-hansi-theme-font: minor-latin;\"\u003eDownloading the Course Guided Notes;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: 'Aptos',sans-serif; mso-ascii-theme-font: minor-latin; mso-hansi-theme-font: minor-latin;\"\u003eViewing all lesson videos in their entirety;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: 'Aptos',sans-serif; mso-ascii-theme-font: minor-latin; mso-hansi-theme-font: minor-latin;\"\u003eCompleting and passing Knowledge Checks with a score of 70% or better;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: 'Aptos',sans-serif; mso-ascii-theme-font: minor-latin; mso-hansi-theme-font: minor-latin;\"\u003eCompleting and passing the Final Exam with a score of 70% or better;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: 'Aptos',sans-serif; mso-ascii-theme-font: minor-latin; mso-hansi-theme-font: minor-latin;\"\u003eCompleting the Student Course Exit Evaluation\u003c\/span\u003e\u003cspan style=\"font-family: 'Aptos',sans-serif; mso-ascii-theme-font: minor-latin; mso-hansi-theme-font: minor-latin;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eUpon Successful Completion\u003c\/h2\u003e\n\u003cp\u003eYou will recieve a Certificate of Completion with 1.5 CEU's listed on the certificate and your name will be added to the certification database. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eStudent Testimonial\u003c\/h2\u003e\n\u003cp\u003e\"\u003cem\u003eI am a brand-new installer with little knowledge, and this course has helped me really understand everything we do and deal with in the field\u003c\/em\u003e.\" - David B. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWondering if your employer will cover this training?\u003c\/h3\u003e\n\u003cp\u003eDownload our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.smartbuildingsacademy.com\/request-for-training\" target=\"_blank\"\u003eRequest for Training Template\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand learn how to ask your employer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDisclosure of Instructor's Proprietary Interests\u003c\/h3\u003e\n\u003cp\u003eThe instructor, who is also the Smart Buildings Academy owner, may mention materials and\/or products that are proprietary to Smart Buildings Academy. If these materials are required for the course(s) this will be clearly identified in the course’s product description on our course page.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cem\u003eAdditional Materials Required: None\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRefund Policy\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eALL SALES ARE FINAL AND NON-REFUNDABLE. The fees associated with your purchases will appear on your Active Credit Card Statement through the Identifier \"Smart Buildings Academy LLC\". All prices displayed on the site are quoted in U.S. Dollars, are payable in U.S. Dollars, and are valued and effective only in the United States. Failure to use the product(s) does not constitute a basis for refusing to pay any of the associated charges. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSubject to the conditions set forth herein, you agree to be bound by the Billing Provisions of Smart Buildings Academy LLC in effect at any given time. Upon reasonable prior notice to you (with site updates and\/or e-mail sufficing), Smart Buildings Academy LLC reserves the right to change its Billing Provisions whenever necessary, in its sole discretion. Continued use of the site and\/or purchase of product(s) after receipt of such notice shall constitute consent to any and all such changes; provided, however, that any amendment or modification to the Billing Provisions shall not apply to any charges incurred prior to the applicable amendment or modification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eComplete terms and conditions can be accessed at the following link - \u003c\/span\u003e\u003ca href=\"https:\/\/www.smartbuildingsacademy.com\/t-and-c?hs_preview=IoENyuRq-172865735957\" rel=\"noopener\" target=\"_blank\"\u003eTerms and Conditions\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e","published_at":"2024-07-01T13:08:38-07:00","created_at":"2024-07-01T13:08:38-07:00","vendor":"Smart Buildings Academy","type":"Single Seat Course","tags":[],"price":150000,"price_min":150000,"price_max":150000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46237343973563,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"BAS220-1SEAT","requires_shipping":false,"taxable":true,"featured_image":null,"available":true,"name":"BAS220: BAS Controls Installer Bootcamp","public_title":null,"options":["Default Title"],"price":150000,"weight":0,"compare_at_price":null,"inventory_management":null,"barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/TESTBASControlsInstallerBC.png?v=1719864327"],"featured_image":"\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/TESTBASControlsInstallerBC.png?v=1719864327","options":["Title"],"media":[{"alt":null,"id":27992688787643,"position":1,"preview_image":{"aspect_ratio":1.778,"height":720,"width":1280,"src":"\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/TESTBASControlsInstallerBC.png?v=1719864327"},"aspect_ratio":1.778,"height":720,"media_type":"image","src":"\/\/courses.smartbuildingsacademy.com\/cdn\/shop\/files\/TESTBASControlsInstallerBC.png?v=1719864327","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eBAS220: BAS Controls Installer Bootcamp is a meticulously structured program that prepares participants to be field-ready as service or construction technicians, focusing specifically on low voltage control systems within the context of building automation.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eCourse Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFully online, self-paced course\u003c\/li\u003e\n\u003cli\u003eOverall course length is 14 hours and 9 minutes\u003c\/li\u003e\n\u003cli\u003eLive weekly office hours\u003c\/li\u003e\n\u003cli\u003eAccess to all course material for (1) one full year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eObjectives\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLearn to not only proficiently install and manage intricate low voltage control systems, but also excel in troubleshooting and resolving issues efficently. \u003c\/li\u003e\n\u003cli\u003eEmerge as a well-rounded technician with a robust understanding of both theoretical and practical aspects of controls installation. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eKey Topics Taught\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIntroduction to essential tools in the BAS industry\u003c\/li\u003e\n\u003cli\u003eAn introduction to Building Automation on fundamentals and key concepts \u003c\/li\u003e\n\u003cli\u003eInsights into HVAC mechanics within BAS\u003c\/li\u003e\n\u003cli\u003eUnderstanding the blueprints of automation projects\u003c\/li\u003e\n\u003cli\u003eCore principles of electricity in BAS context\u003c\/li\u003e\n\u003cli\u003eTechniques for setting up robust networks\u003c\/li\u003e\n\u003cli\u003eComprehensive study of system inputs\u003c\/li\u003e\n\u003cli\u003eDeep dive into system outputs\u003c\/li\u003e\n\u003cli\u003eHands-on approach to installing various devices\u003c\/li\u003e\n\u003cli\u003eSkills for identifying and solving electrical issues\u003c\/li\u003e\n\u003cli\u003eWrapping up projects efficiently and effectively\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eTargeted Audience\u003c\/h2\u003e\n\u003cp\u003eThis course is targeted towards electrical installers and subcontractors. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePre-Requisite Knowledge Requirements\u003c\/h2\u003e\n\u003cp\u003eNo pre-requisite knowledge is required. \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cem\u003eAdditional Materials Required: None\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eSuccessful Completion Requirements\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"font-family: 'Aptos',sans-serif; mso-ascii-theme-font: minor-latin; mso-hansi-theme-font: minor-latin;\"\u003eDownloading the Course Guided Notes;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: 'Aptos',sans-serif; mso-ascii-theme-font: minor-latin; mso-hansi-theme-font: minor-latin;\"\u003eViewing all lesson videos in their entirety;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: 'Aptos',sans-serif; mso-ascii-theme-font: minor-latin; mso-hansi-theme-font: minor-latin;\"\u003eCompleting and passing Knowledge Checks with a score of 70% or better;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: 'Aptos',sans-serif; mso-ascii-theme-font: minor-latin; mso-hansi-theme-font: minor-latin;\"\u003eCompleting and passing the Final Exam with a score of 70% or better;\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-family: 'Aptos',sans-serif; mso-ascii-theme-font: minor-latin; mso-hansi-theme-font: minor-latin;\"\u003eCompleting the Student Course Exit Evaluation\u003c\/span\u003e\u003cspan style=\"font-family: 'Aptos',sans-serif; mso-ascii-theme-font: minor-latin; mso-hansi-theme-font: minor-latin;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eUpon Successful Completion\u003c\/h2\u003e\n\u003cp\u003eYou will recieve a Certificate of Completion with 1.5 CEU's listed on the certificate and your name will be added to the certification database. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eStudent Testimonial\u003c\/h2\u003e\n\u003cp\u003e\"\u003cem\u003eI am a brand-new installer with little knowledge, and this course has helped me really understand everything we do and deal with in the field\u003c\/em\u003e.\" - David B. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eWondering if your employer will cover this training?\u003c\/h3\u003e\n\u003cp\u003eDownload our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.smartbuildingsacademy.com\/request-for-training\" target=\"_blank\"\u003eRequest for Training Template\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand learn how to ask your employer.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDisclosure of Instructor's Proprietary Interests\u003c\/h3\u003e\n\u003cp\u003eThe instructor, who is also the Smart Buildings Academy owner, may mention materials and\/or products that are proprietary to Smart Buildings Academy. If these materials are required for the course(s) this will be clearly identified in the course’s product description on our course page.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cem\u003eAdditional Materials Required: None\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eRefund Policy\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eALL SALES ARE FINAL AND NON-REFUNDABLE. The fees associated with your purchases will appear on your Active Credit Card Statement through the Identifier \"Smart Buildings Academy LLC\". All prices displayed on the site are quoted in U.S. Dollars, are payable in U.S. Dollars, and are valued and effective only in the United States. Failure to use the product(s) does not constitute a basis for refusing to pay any of the associated charges. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSubject to the conditions set forth herein, you agree to be bound by the Billing Provisions of Smart Buildings Academy LLC in effect at any given time. Upon reasonable prior notice to you (with site updates and\/or e-mail sufficing), Smart Buildings Academy LLC reserves the right to change its Billing Provisions whenever necessary, in its sole discretion. Continued use of the site and\/or purchase of product(s) after receipt of such notice shall constitute consent to any and all such changes; provided, however, that any amendment or modification to the Billing Provisions shall not apply to any charges incurred prior to the applicable amendment or modification.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eComplete terms and conditions can be accessed at the following link - \u003c\/span\u003e\u003ca href=\"https:\/\/www.smartbuildingsacademy.com\/t-and-c?hs_preview=IoENyuRq-172865735957\" rel=\"noopener\" target=\"_blank\"\u003eTerms and Conditions\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c!----\u003e"}

BAS220: BAS Controls Installer Bootcamp

$1,500.00

BAS220: BAS Controls Installer Bootcamp is a meticulously structured program that prepares participants to be field-ready as service or construction...

Features	___product_title___ ___product_old_price______product_price___ View
Availability	___product_availability___
Options	___product_options___
Author	___product_vendor___
Collection	___product_collection___
Rating	___product_rating___

Features	___product_label_sale___ ___product_label_new___ ___product_title___ ___product_old_price______product_price___ Availability ___product_availability___ View
Availability	___product_availability___
Options	___product_options___
Author	___product_vendor___
Collection	___product_collection___
Rating	___product_rating___

Workforce Development Voucher - Any Cohort

Week 1 – Introduction to BAS Field Work

Week 2 – IT and Controls Integration

Week 3 – Variable Air Volume (VAV) and Fan Coil Unit (FCU) Systems

Week 4 – Rooftop Units (RTUs) and System Architecture

Week 5 – Mixed Air Handling Units & Interface Design

Week 6 – Pump Control and Troubleshooting Fundamentals

Week 7 – Hydronic Heating System Control

Week 8 – Chilled Water Systems and Programming Introduction

Week 9 – Networking, Cybersecurity, and Advanced Programming

Week 10 – Checkout, Commissioning & Handoff

Week 11 – Practicum

Related Courses:

You may also like:

BAS001: Building Automation Systems A to Z

You may also like:

BAS100: Building Automation Fundamentals

You may also like:

BAS200: Control Sequence Fundamentals

You may also like:

BAS210: BAS Protocol Bootcamp

You may also like:

BAS220: BAS Controls Installer Bootcamp